Info-Atari16 Digest Wed, 22 Jan 92 Volume 92 : Issue 36 Today's Topics: 1040 st floppy drive problem 68030 SST Anyone interested in a sound saver for the Roland D70. Atarians! Where Are You?! Dungeon Master, once again Help atari.archive Multifinder for Atari-ST ? need bits and pieces for Genedit, Cubase New Supra Modem... (2 msgs) Notator and sysex Sozobon 1.33i vs. Sozobon 2.0 (extras) Sozobug 1.33i (2 msgs) ST Drive blues Thanks for all the mail-order/MIDI info! various ST topics What to do? (2 msgs) Woodlands Design Disk for CAD 3D Welcome to the Info-Atari16 Digest. The configuration for the automatic cross-posting to/from Usenet is getting closer, but still getting thrashed out. Please send notifications about broken digests or bogus messages to Info-Atari16-Request@NAUCSE.CSE.NAU.EDU. Please send requests for un/subscription and other administrivia to Info-Atari16-Request, *NOT* Info-Atari16. Requests that go to the list instead of the moderators are likely to be lost or ignored. If you want to unsubscribe, and you're receiving the digest indirectly from someplace (usually a BITNET host) that redistributes it, please contact the redistributor, not us. ---------------------------------------------------------------------- Date: 22 Jan 92 13:35:44 GMT From: mcsun!uknet!strath-cs!prlhp1!lloyd@uunet.uu.net (Phil Lloyd) Subject: 1040 st floppy drive problem To: Info-Atari16@naucse.cse.nau.edu Can anyone comment on a problem I have with my Atari 1040 ST floppy drive? I get occasional, random failures, like inability to load a program, and screw-ups when writing to disc (even something as simple as entering a score into a game score-table). Sometimes there are bombs on the screen. The problem seems to be associated with the initial activity when accessing a disc. For instance, I can prevent trouble when writing to disc, by first removing the disc, manually rotating the media a little (via the central metal section), and reinserting the disc. Could it be that the disc position sensing is not working properly? I had the drive checked out on an exerciser, and it looked OK. Certainly, head alignment and rotational speed were well within spec. If there's something (relatively) simple I can try, then please let me know. I'm inclined to think that replacing the drive is probably the quickest solution! Email responses welcome. Thanks Phil Lloyd lloyd@prl.philips.co.uk ------------------------------ Date: 22 Jan 92 23:14:33 GMT From: arizona.edu!cerritos.edu!nic.csu.net!usc!sdd.hp.com!spool.mu.edu!umn.edu!@arizo na.edu (Stephan Muhs) Subject: 68030 SST To: Info-Atari16@naucse.cse.nau.edu In article <1992Jan13.112953.11593@cs.nott.ac.uk> dpg@cs.nott.ac.uk (`Grave' Dave Gymer) writes: >I've seen quite a few posts about this; I'm probably going to get one as soon >as they are released, but I'm interested in hearing about the 4 meg ST RAM it's >supposed to have; is this really true? If I have 4 meg fastram as well (which >I intend to), can '030 processes use this as well (I'm really thinking of >background tasks in MiNT). > You will use whatever amount of RAM is already installed in your machine as ST RAM. So if you have a 4 MB machine, you will have 4 MB of ST RAM. You should have fast RAM or you will loose close to 50% of the SST`s performance, you can either have 4 or 8 megs. >Also, how difficult is it to install in a Mega ST? (Give me a soldering iron >and I can kiss my ST goodbye). > Then you should *not* do it, unless you already have a socket installed for your CPU. Installation involves removal of the 68000 - if you do not exactly know what you are doing, you might easily kill the board in the process. You should also have a very good desoldering station. If in doubt, then have the board installed by an expert! Stephan -- stephan muhs colonius@dino.dinoco.de wilhelmstr. 51 ...!{tmpmbx|mcshh|smurf|unido}!easix!channelz!dino!colonius 5000 koeln 60 Genie: s.muhs germany voice: +49 221 7393484 ------------------------------ Date: 22 Jan 92 20:47:13 GMT From: noao!ncar!zaphod.mps.ohio-state.edu!rpi!sarah!sarah.albany.edu!ad0834@arizona.e du (Andy Dickinson) Subject: Anyone interested in a sound saver for the Roland D70. To: Info-Atari16@naucse.cse.nau.edu Yeah! Go ahead and upload it! There aren't really any good PD librarians out there for the Roland D-series... Wonder if it will work with my D-10... - Andy //Andy Dickinson///////ad0834@csc.albany.edu///////ad0834@albnyvms.bitnet////// ||||/++++271 Lark St. # 3++++++++++++++++++++------+++++++++++++++++++++++\|||| ||||\+++++++Albany, NY 12210+++++++++++++++++++++++++++=======+++++++++=++/|||| \\\\\\\\\\\\\\\\\\\\\\\\\\\\(518)426-7907\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ------------------------------ Date: 22 Jan 92 13:23:23 GMT From: mcsun!uknet!bcc.ac.uk!ucacmsu@uunet.uu.net (Mr Stephen R Usher) Subject: Atarians! Where Are You?! To: Info-Atari16@naucse.cse.nau.edu In article <1992Jan18.122843.10678@actrix.gen.nz> Roger.Sheppard@actrix.gen.nz (Roger Sheppard) writes: >In article <1992Jan17.022926.27584@milton.u.washington.edu> england@milton.u.washington.edu (Gregory Miller) writes: >> In article <1992Jan16.180537.167@vaxsar.vassar.edu> hishimoda@vaxsar.vassar.edu writes: >> >> england@u.washington.edu >> >> PS: to R Shepard of New Zealand (I believe)... I don't flicker either. >> Guess you've never heard of 640 X 480 productivity mode in four colors >> WITHOUT a friggin' flicker fixer, eh? >> >> AND at least my goddamn pointer NEVER HAS flickered... Not like a dying >> lightglobe! >> >> -- >> _______________________________________________________________________________ >> __ >> I will not be pushed, filed, stamped, indexed, /// >> briefed, debriefed, or numbered. __ /// Only Amiga makes > >Please tell us all how this is posible with Standard A500 or is this >the Reason that the Amiga does not have very many DTP programs..?? > >Also I here that the sales of A500 + is now gone minus, they are all taking >them back as they can't play games on this new machine any more..?? > >And were are all your PD C compilers, this main Amiga chaps here don't >seem to know much about them.. There is now a version of GCC for the amiga with libraries. Don't ask me how good it is cos I've only seen it on a archive and do not have an Amiga. > >Also have you thought that we have better things to do with our >machines than to spend time chatting on the net...:-).. >-- >*** Roger W. Sheppard * Roger.Sheppard@bbs.actrix.gen.nz *** >*** 85 Donovan Rd * * GEnie. R.SHEPPARD5 *** >*** Kapiti At least I don't Flicker, *** >*** New Zealand.. * not like a dying light globe *** Steve -- Addresses:- JANET:- ucacmsu@uk.ac.ucl or susher@uk.ac.csm Internet:- ucacmsu@ucl.ac.uk or susher@csm.ac.uk ------------------------------ Date: 22 Jan 92 19:49:55 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!mips!cs.uoregon.edu!nntp.uoregon.edu!milto n!tymbrimi@arizona.edu (Ben Gilbert) Subject: Dungeon Master, once again To: Info-Atari16@naucse.cse.nau.edu Ok, I have played through Dungeon Master and I am at the end, you know I'm sealed off down there with Chaos, I've destroyed all the flame-sloth things and the dragon and I have the firestaff etc.... My question is simple : HOW do I kill Chaos? I know it's something about fluxcaging/fusing but I have been fighting him for at least 5-10 hours (no, not all at once) with no effect. Someone help please, I'm running out of food/water... Ben ------------------------------ Date: 22 Jan 92 12:34:20 GMT From: arizona.edu!cerritos.edu!orion.oac.uci.edu!usc!sdd.hp.com!cs.utexas.edu!qt.cs.u texas.edu!@arizona.edu Subject: Help atari.archive To: Info-Atari16@naucse.cse.nau.edu I have a general question. I'm new to this system, and I've been reading message stating that there are files available from atari.archive, how do I get these files? I've successfull used ftp, but I don't know the host name for atari.archive. Or is it part of this system? Thanks is advance for your help. Henry Szarmach VAX mail address = TIN::"heszar@skca9.monsanto.com" ------------------------------ Date: 22 Jan 92 17:39:18 GMT From: mcsun!corton!imag!imag.fr@uunet.uu.net (Florence Maraninchi) Subject: Multifinder for Atari-ST ? To: Info-Atari16@naucse.cse.nau.edu I need something like the equivalent of the Macintosh multifinder for Atari ST. Does it exist ? Or perhaps someone can find another way of solving my problem : I would like to use a Lisp interpreter which does not allow to call an editor. And I don't want to quit the interpreter, then to load the editor, etc... for each modification of the source. Thanks in advance ------------------------------ Date: 22 Jan 92 17:09:37 GMT From: van-bc!ubc-cs!newsserver.sfu.ca!fraser.sfu.ca!rogalsky@uunet.uu.net (Matthew Rogalsky) Subject: need bits and pieces for Genedit, Cubase To: Info-Atari16@naucse.cse.nau.edu Hello Can anybody tell me where I could find a) printer drivers for Cubase 2.0 b) templates and configurations for Genedit both on ST of course. If yu know of an ftp or other site, or have these programs complete with an assortment of these items and would be willing to email them to me (they're OK to trade as far as I know), please drop me a line. ps. I am looking for Emax templates/configs esp. thanks Matt rogalsky@mailserver.sfu.ca ------------------------------ Date: 22 Jan 92 19:47:23 GMT From: noao!asuvax!ncar!elroy.jpl.nasa.gov!usc!rpi!usenet.coe.montana.edu!ogicse!milto n!tymbrimi@arizona.edu (Ben Gilbert) Subject: New Supra Modem... To: Info-Atari16@naucse.cse.nau.edu Hi, I recently saw an ad in a friend's computer magazine for a new Supra modem, something like the Supra 2400 PLUS, it says it has asynchronous 300,1200,2400 bps (that's the usual I suppose), 4800 bps with MNP 5, and 9600 bps with v32.bis or v42.bis (can't remember which). So can I actually pay the CHEAP $130 bucks for this modem and dial up my school net at 9600 baud? Sounds like a good deal to me, I know that my school dial-in IS this new v32(42).bis thing, someone tell me, 9600 baud would be awesome for only $130 mail order... Ben ------------------------------ Date: 22 Jan 92 21:03:16 GMT From: noao!ncar!elroy.jpl.nasa.gov!usc!wupost!spool.mu.edu!umn.edu!cs.umn.edu!thelake !steve@arizona.edu (Steve Yelvington) Subject: New Supra Modem... To: Info-Atari16@naucse.cse.nau.edu [In article <1992Jan22.194723.23878@milton.u.washington.edu>, tymbrimi@milton.u.washington.edu (Ben Gilbert) writes ... ] > Hi, I recently saw an ad in a friend's computer magazine for a new > Supra modem, something like the Supra 2400 PLUS, it says it has > asynchronous 300,1200,2400 bps (that's the usual I suppose), 4800 bps > with MNP 5, and 9600 bps with v32.bis or v42.bis (can't remember which). > So can I actually pay the CHEAP $130 bucks for this modem and dial up > my school net at 9600 baud? Sounds like a good deal to me, I know that > my school dial-in IS this new v32(42).bis thing, someone tell me, 9600 > baud would be awesome for only $130 mail order... You're confusing several different Supra modems. The 2400plus doesn't do V.32. It is a 2400 modem with MNP5 and V.42/V.42bis, which provide error correction and (potentially) data compression. Theoretically, V.42bis can provide throughout of up to 9600bps, but in practice the gain from compression is modest, especially if you're transferring compressed data (ARC, LZH or ZOO files). The 2400plus lists for about $199 and retails for about $130. (This message comes to you through a 2400plus). V.32 is a standard that provides a real 9600bps connection; the protocols that provide error connection and data compression can be piggybacked onto that. Supra recently announced a V.32 modem and a V.32bis modem (14,400). The list prices are $349.95 and $399.95 respectively. I think BBS sysops can buy the V.32 model for about $199 under Supra's sysop program. Incidentally, the new models also support fax transmissions, but Supra doesn't have fax software for the ST. Here are Supra's addresses: Supra Corp 7101 SW Supra Drv Albany, OR 97321 503-967-2400 Main 503-967-2401 Fax 503-967-2440 Tech Support (9-4 pst) 503-967-2444 BBS 800-727-8772 Orders Only CIS - 76004,565 GEnie - SupraTech Bix - SupraCorp You can send Internet mail to Supra at 76004.565@compuserve.com. -- Steve Yelvington, Marine on St. Croix, Minnesota Note: Mail to the .mn.org domain has been failing for about a month. If your mail bounces, try cs.umn.edu!thelake!steve. It's probably another side effect of the Super Bowl. (I'm praying for a blizzard on Super Sunday.) ------------------------------ Date: 22 Jan 92 16:02:22 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!ub!dsinc!gvlf3.g vl.unisys.com!tredysvr!cellar!darling@arizona.edu (Thomas Darling) Subject: Notator and sysex To: Info-Atari16@naucse.cse.nau.edu be824@cleveland.Freenet.Edu (Steve Selick) writes: > Has anybody else out there had any problems saving long strings of > sysex data in Notator? I have never had problems with my sampler and > Sound Designer, but Notator will almost always give me errors, and > it gets all locked up. Any suggestions? This has never happened to me, but a friend of mine was experiencing similar problems. His solution was to record the sysex at a fast tempo, and then play it back at a slower one. You can also take it to the extreme and use the "half speed" function on your sysex track, if you don't mind it taking longer so send over. (Btw, you're not sending over entire sample dumps, are you? You're really asking for trouble, in that case.) ~%~%~%~%~%~%~%~%~%~\\\~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~% darling@cellar.org \\\ Thomas Darling * record production * dance re-mixing uunet!cellar!darling \\\ Fact HQ Studio * The Cellar BBS:215/654-9184 * FACT v%v%v%v%v%v%v%v%v%v%v%\\\%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v% ------------------------------ Date: 22 Jan 92 18:28:04 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!mips!spool.mu.edu!umn.edu!cs.umn.edu!thela ke!steve@arizona.edu (Steve Yelvington) Subject: Sozobon 1.33i vs. Sozobon 2.0 (extras) To: Info-Atari16@naucse.cse.nau.edu [In article <1992Jan22.121749.2525@cs.nott.ac.uk>, dpg@cs.nott.ac.uk (`Grave' Dave Gymer) writes ... ] > Which version of MiNT are you running? There was a hack in at least one version > of MiNT which allows dLibs to work; it was removed in later version of MiNT. > Maybe I got hold of the wrong end of the stick, but I thought all versions > of dLibs misbehaved, because, among other things, they try to recover > information from their parent process (which may well have terminated under > MiNT). Looks like it's MiNT 0.91, the most recent that was posted to comp.binaries. > In any case, I'm not using dLibs with Sozobon, I'm using a half-baked port > I did of Eric Smith's MiNTlib, which is why I'd like source. (I _hate_ using > \ in filenames; I have to type them all twice from bash or ksh!) I did a little bit of half-baking on MiNTlib before the ski lifts started running. (Now my weekends are devoted to an attempt to break some bones before the snow melts.) MiNTlib isn't the sort of project that you can work on with 15 minutes here, 30 minutes there, so now I just have a bunch of untouched files eating up disk space. -- Steve Yelvington, Marine on St. Croix, Minnesota Note: Mail to the .mn.org domain has been failing for about a month. If your mail bounces, try cs.umn.edu!thelake!steve. It's probably another side effect of the Super Bowl. (I'm praying for a blizzard on Super Sunday.) ------------------------------ Date: 22 Jan 92 18:17:36 GMT From: noao!ncar!elroy.jpl.nasa.gov!usc!wupost!spool.mu.edu!umn.edu!cs.umn.edu!thelake !steve@arizona.edu (Steve Yelvington) Subject: Sozobug 1.33i To: Info-Atari16@naucse.cse.nau.edu [In article <1992Jan21.135935.1467@desire.wright.edu>, cse0507@desire.wright.edu writes ... ] > Would somebody else please try a particular call in Sozobon 1.33i? > The offending call is vqf_attributes, and I'm getting back trash > for the fourth array parameter. What's more, it crashes my TT really > bad. Using vdicall, I can code it up by hand, but...geez. Is it me, or > is it Memorex? It's probably a bug in VDIFAST.A; not all of the VDI functions have been extensively tested. It would be great if you could mail me a little program demonstrating how you called the function (to make sure that we're all working off the same function description!) I can forward it to the author. Also, could you post your rewrite that uses vdicall? That way everybody can use your code while waiting for Ian to fix the GEMFAST bug. -- Steve Yelvington, Marine on St. Croix, Minnesota Note: Mail to the .mn.org domain has been failing for about a month. If your mail bounces, try cs.umn.edu!thelake!steve. It's probably another side effect of the Super Bowl. (I'm praying for a blizzard on Super Sunday.) ------------------------------ Date: 22 Jan 92 14:31:27 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!mips!spool.mu.edu!umn.edu!lapis.labmed.umn .edu!davidli@arizona.edu Subject: Sozobug 1.33i To: Info-Atari16@naucse.cse.nau.edu In article , steve@thelake.mn.org (Steve Yelvington) writes: > ...not all of the VDI functions have been extensively tested. Just a note to let folks know that there is at -least- a problem with one of the example programs that comes with the 1.33i release and STe computers. I installed the 1.33i release on an STe last night, during the local MAST+ programmers meeting. We then 'tested' the program by clicking on the makefile in the example programs folder. It compiled and ran the test programs without a hitch. However, the 'minicolr' pallette changer doesn't work with STe machines. I didn't go through the code enough to learn whether it was a special call or not; I assume that the program makes assumptions about the color pallette information (which is 4 bits for the STe vs. 3 bits for the ST). It -did- produce an interesting Moire pattern before locking up though. :) -- David Paschall-Zimbel davidli@simvax.labmed.umn.edu "The most important fact about Spaceship Earth: An instruction book didn't come with it." -- R. Buckminster Fuller ------------------------------ Date: 22 Jan 92 16:44:19 GMT From: mcsun!uknet!edcastle!aisb!aifh!aiscc@uunet.uu.net (Stuart Charman) Subject: ST Drive blues To: Info-Atari16@naucse.cse.nau.edu I have but a lowly single-sided internal drive, and am desperately in need of an update to double-sided. Can anyone give me any advice as to the best or cheapest way to go about this. Can I simply buy a external drive, or must I fit a new internal. What price an internal, can I fit it myself. Cheers, Stuart. ------------------------------ Date: 22 Jan 92 20:48:41 GMT From: noao!ncar!elroy.jpl.nasa.gov!usc!rpi!sarah!sarah.albany.edu!ad0834@arizona.edu (Andy Dickinson) Subject: Thanks for all the mail-order/MIDI info! To: Info-Atari16@naucse.cse.nau.edu Hi all! Just wanted to thank everyone who sent me mail order software company phone numbers and offers to sell MIDI software! Thanks! //Andy Dickinson///////ad0834@csc.albany.edu///////ad0834@albnyvms.bitnet////// ||||/++++271 Lark St. # 3++++++++++++++++++++------+++++++++++++++++++++++\|||| ||||\+++++++Albany, NY 12210+++++++++++++++++++++++++++=======+++++++++=++/|||| \\\\\\\\\\\\\\\\\\\\\\\\\\\\(518)426-7907\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ------------------------------ Date: 22 Jan 92 19:20:01 GMT From: noao!asuvax!ukma!wupost!cs.utexas.edu!utgpu!watserv1!sail!ec333way@arizona.edu (Winter92 BEACON ec333 account) Subject: various ST topics To: Info-Atari16@naucse.cse.nau.edu I'm just recently found a way to access a.a.u.e, and now I am wondering what things I should get a copy of and what I shouldn't bother with due to memory constraints. I have a 1040fm (1 meg), and a 52 meg hard drive, so space is not a problem, memory is. I have heard several times that gcc needs 4 megs, so I shouldn't bother with it. I am interested in TeX. Can I run it in 1 meg? Which files do I need? I have a 9 pin & a 24 pin printer at home. Am I just wasting my time until I get a laser printer? I would also love to get the ksh that several people have mentioned - so far I have only seen bash. I am also interested in MiNT - is there any use when I only have 1 meg? Anyone have a list of 'must-have' utils for the ST? There are so many files and I only have access for 1 term (until end of april) unless I can get another account somewhere else. Is there a good VI for the ST? I have STevie, but it seems somewhat slow (screen updates) even running quickST. I will soon be upgrading to TOS 1.4. I have heard that there are still a few bugs with it. Are there any patches/fixes around, and if so, what are they? As a side note, what happened to MegaMax? Haven't seen anything from them since my upgrade to Laser C. Did they go belly up and/or drop the ST? Is there a version out there later than 2.0? Question about the SST. Saw an add in Atari User recently. However, it wasn't clear what the board comes with, if anything. Does it include a 68030? Any memory? Hope I can finally get some of these longstanding questions answered. Mattias reply to mghembruch@electrical.watstar.uwaterloo.ca or ec333way@sail.uwaterloo.ca (expires end of april - prefer 1st address) Ok Ok, so I haven't had time to design a nice fancy signature yet.. Sue me!! R R or ec333way@sail.uwaterloo.ca (first one preferred) upgrading to TOS 1. ------------------------------ Date: 22 Jan 92 13:35:32 GMT From: mcsun!uknet!bcc.ac.uk!ucacmsu@uunet.uu.net (Mr Stephen R Usher) Subject: What to do? To: Info-Atari16@naucse.cse.nau.edu In article <1992Jan20.011530.156@demon.co.uk> Keith Sommerville writes: >Have you looked more closely at the HD in your TT? I have the same spec TT as >you and the label on the bottom of the TT says 8Mb/40Mb. The drive was partiti- >onedi Well.. I bought mine as an 8Mb/40Mb machine, but it had 2Mb/40Mb on the bottom. Do you think Attari hadn't got any high-end machines in stock when I bought mine :-)? >into 4 10Meg partitions. However, looking at it with ICD software revealed tha- >t it was >it was a 48.5 meg drive. Why do Atari hide something like that, or is it just - >a one >one off? Mine was the same, but I imeadiately repartitioned the drive using the HDX tools to make two partitions of reasonable size. Steve PS. How did you get the ICD utils to see the TT scsi bus? -- Addresses:- JANET:- ucacmsu@uk.ac.ucl or susher@uk.ac.csm Internet:- ucacmsu@ucl.ac.uk or susher@csm.ac.uk ------------------------------ Date: 22 Jan 92 17:38:46 GMT From: mcsun!corton!seti!rita.inria.fr!dujardin@uunet.uu.net (Eric Dujardin) Subject: What to do? To: Info-Atari16@naucse.cse.nau.edu In article <1992Jan15.140754.32779@link-1.ts.bcc.ac.uk>, ucacmsu@ucl.ac.uk (Mr Stephen R Usher) writes: |> PS. For the record... I own the following computers:- ........ |> |> Memotech MTX500 (R.I.P. & no-one's ever heard of it!) ~~~~~~~~~~~~~~~~~~~~~~~~~~ I did ! I remember the black box, with separate keyboard, I think. I saw it in some ads, and even in a shop ! I felt it was a little expensive for me at that time.... -- Eric Dujardin - dujardin@sabre.inria.fr INRIA Rocquencourt, projet Sabre "Noel au balcon, Paques aux tisons" ------------------------------ Date: 22 Jan 92 17:56:25 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!cs.utexas.edu!utgpu!watserv1!watmath!darol oso@arizona.edu (Dani A. Roloson) Subject: Woodlands Design Disk for CAD 3D To: Info-Atari16@naucse.cse.nau.edu Does anyone have a working copy of this? I bought one a while ago and I could see all the files and display them as text on the screen but copying them or trying to use them in Cyber Studio resulted in disk errors. The guy at the local store checked with the distributor but the entire batch was foobar. He then sent it back to Antic for me but that was when they disappeared off the face of the earth. I located another copy in Toronto last fall but it was foobar, too. Dani Roloson ------------------------------ End of Info-Atari16 Digest ******************************